Top Entering Mixers Mounted on the Tank Centerline

612 views

04/07/2021 12:54

RESEARCH & DEVELOPMENT
MISCIBLE AGITATOR TESTING CENTER

Top Entering Mixers Mounted on the Tank Centerline

Baffles must be provided for low viscosity mixing for top-entering mixers are located on the tank centerline. This also includes fixed mounted mixersmounted vertically on the tank cneterline. Baffles ensure that the entrie batch will pass through the zone of the impeller where thereis maximum agitation insensity. Other effects of baffles are that they

[1]. Promote the flow pattern required for the process
[2]. Direct flow from the impeller, producing the required vertical currents
[3]. change the flow from a rotary (essentially static) pattern to a mixing pattern
[4]. prevent excessive swirling, vortexing and air induction
[5]. Greatly improve mixer-loading accuracy
[6]. Assure a stable, consistent power draw
[7]. Produce more uniform, radial shaft loads (less buffeting)which allows longer shaft lengths

Thank You
Sataporn Liengsirikul
(Agitator Designer)
Tel : 091.7400.555
www.miscible.co.th
Email : miscible@miscible.co.th
MISCIBLE TECHNOLOGY CO., LTD.

Tags

ผู้เชี่ยวชาญด้าน Agitator, Mixing Tank, Mixer, Disperser, Homogenizer, High Shear Mixer, Air Mixer, Impellers design, เครื่องกวน, เครื่องผสม, ถังผสม, ใบกวน, ใบผสม, การออกแบบเครื่องกวน, การออกแบบถังผสม, ออกแบบระบบ SCADA, ออกแบบระบบ PLC, ออกแบบระบบอัตโนมัติสำหรับโรงงานอุตสาหกรรม, ตู้ MDB, ตู้ MCC,งาน EPC เครื่องกลไฟฟ้า

Blogs

Mixing with Baffle and without Baffle

RESEARCH & DEVELOPMENT MISCIBLE AGITATOR TESTING CENTER Mixing with Baffle and without Baffle Comparesion Vortex Deepness & Dead Zone of Mixing [Withiut Baffle]——[With Baffle] Impeller Types: VISCROP.4B d/D = 0.45 No.of Blades : 4 Tip Speed Same Calculate Flow Pattern : 90%-10%-0% Note: Axial flow-Radial flow-Tangential flow Thank You Sataporn Liengsirikul (Agitator Designer) Tel : 091.7400.555 www.miscible.co.th Email : miscible@miscible.co.th MISCIBLE TECHNOLOGY CO., LTD.

Comparesion On Center and Off Center of Impellers

RESEARCH & DEVELOPMENT MISCIBLE AGITATOR TESTING CENTER Comparesion On Center and Off Center of Impellers [Flatblades.T-On Center] .. [Flatblades.T-Off Center] [Flatblades.T] d/D = 0.33 No.of Blades : 6 Tip Speed Same Calculate Flow Pattern : 100%-0%-00% Note: Axial flow-Radial flow-Tangential flow Thank You Sataporn Liengsirikul (Agitator Designer) Tel : 091.7400.555 www.miscible.co.th Email : miscible@miscible.co.th MISCIBLE TECHNOLOGY CO., LTD.

Flow Pattern

RESEARCH & DEVELOPMENT MISCIBLE AGITATOR TESTING CENTER Flow Pattern Flow Pattern of Viscrop Impeller / Jetprop2B Impeller / Mix Blades Impeller / Fold Blades Impeller, Reynolds number can be calculated same Viscosity = 1 mPa.sec Density = 1,000 kg/m^3 Tip Speed = 1.8 m/sec RE = 2.8 e+5 MISCIBLE TECHNOLOGY CO.,LTD Line@ : @agitator Email : miscible@miscible.co.th